Make Your Old Shirt a DIY Face Mask

8 Materials
$10
1 Hour
Easy


Face masks are the perfect answer to those old shirts that you have in the back of your closet. They don’t require much material and they are so easy to make. What’s even better is that this face mask tutorial teaches you how to make your face mask with a pocket, so you can keep switching out your filter and stay safe!

DIY face mask

Tools and materials:

  • Paper
  • Rulers
  • Pencils
  • Scissors
  • Old shirt
  • Elastic
  • Flat cords
  • Disposable filter
Face mask with filter

Create your pattern 

Create your pattern by following the stencil above. Once you’ve drawn out your pattern, grab a pair of scissors and cut it out. You will be left with one (almost square-shaped) piece. 

Face mask with filter pocket

Cut out your fabric 

Grab an old shirt and cut it open. Cut along the side seams until you hit the shoulders. Then, cut across the shoulders so that you're left with two separate pieces that once made up the front of the shirt. Place them right sides together and button them together. 

How to make a face mask

Next, place your pattern on the shirt with the back edge of the mask going over a button. Grab a pencil and draw around your pattern, adding on a one-centimeter (about half an inch) seam allowance. Use some scissors to cut your mask out. Repeat for a second cut out - this time, however, you can use your already cut out fabric instead of adding a seam allowance to your pattern. 

Easy face mask

Connect your fabric 

You should now have four pieces of fabric, two with buttons and two with holes. Take your two buttoned pieces and place them together, wrong sides together. Do the same with the pieces with the holes. Next, use a zigzag stitch to secure the curved edges of both pairs.

Sew a face mask

Connect the mask 

At this point, you should have two pieces of fabric, Open them up and stack them together (right side onto the wrong side). Align the seams and place pins by all four corners as well as at the tip of the middle seam. Sew the top and bottom edges of the face mask using a zigzag stitch. Next, turn the mask right side out and pin the corners and seam edges like before. Now go back over the zigzag stitch with a topstitch. 

Make a face mask

Connect the elastic 

Cut a piece of elastic between 18 - 21 centimeters (approximately seven to eight inches). Fold the elastic in half and cut. Weave the two pieces of elastic through two hole plastic flat cords. Place the rough edges of the elastic in the open sides of the mask. Pin to secure and sew the elastic to the mask (make sure to only sew the corners with the elastic and keep the rest of the side edges open). 

How to sew a face mask

Insert your filter 

Trace your face mask onto a disposable filter and cut out the correct shape. Place the filter into the gap in the mask by folding it gently and close the mask using the buttons. 

Face mask tutorial


Side view of the face mask


Finished face mask

There you have it, a safe, protective, reusable, and adjustable face mask tutorial. These masks look great, are super comfortable, and make great use of those old shirts you have collecting dust in your closet. 

Suggested materials:

  • Paper
  • Rulers
  • Pencils
See all materials

Join the conversation

4 of 31 comments
Your comment...