Make a ZARA Wrap Top in a Few Simple Steps

8 materials
$25
3 Hours
Medium


I love Zara; they have some lovely fashionable items that I can’t get enough of. Being a sewing enthusiast gives me the freedom to sew what I like and to get inspiration from other designs. In this tutorial, I am going to show you how to make a ZARA wrap top. I love the look, and I got inspired to make my own DIY ZARA wrap top. The overlapping bodice and the shirred waistband just make the top so darn special! Want to see how I make a ZARA wrap top? Keep on scrolling

Tools and materials:

  • 2 yards fabric of your choice
  • Scissors
  • ¼ inch elastic
  • Safety Pin
  • Fabric marker or chalk
  • Pins
  • Sewing machine
  • Matching thread
  • Elastic thread
DIY ZARA wrap top

Make the pattern

I made this pattern by tracing my own clothes; you can see more on how to make a pattern like this by seeing my previous video here. Also, I used the same pattern for my puffy sleeve tutorial for the sleeves, which you can view here.

Sew a ZARA wrap top

Cut the bodice pieces and sew the hems

We’re going to start with the bodice. Cut Four bodice pieces- two for the front and two for the back. Next, hem the slanted edges of all four pieces with a double-fold hem. Fold over half an inch and sew, and repeat this step again.


Cut off the excess fabric at the ends.

Easy ZARA wrap top

Pin the shoulders and sew

Pin the two backs with the two fronts at the shoulders. Then, sew together with a straight stitch. Once done, finish the raw edge with a zigzag stitch.

Make a ZARA wrap top

Next, topstitch the seam and face it to the back of the shirt.

How to sew a ZARA wrap top

Overlap the pieces and sew

So the overlapping fabric is what gives the ZARA wrap top its character. To create the wrap shirt, overlap the sides as shown and pin in place.

How to make a ZARA wrap top

Repeat the same at the back and sew both sides in place; making sure you sew along the whole seam line.

Basic ZARA wrap top

Make the sleeves

For the sleeves, mark 4 inches from each edge of the curved shoulder part.

ZARA wrap top tutorial

Between those marks, sew a long straight stitch. Backstitch the beginning, but not the end. Also, to make the gathered effect, leave the thread long enough so that you can pull and gather the sleeve. Pull the thread, and with your other hand, gather the fabric. Repeat with the other sleeve. How amazing is this technique?

ZARA wrap top sewing tutorial

Attach the sleeve to the shoulder seam

Mark 3 inches on either side of the shoulder seam of the top. Next, lay the sleeve itself on the top, right sides facing. Pin the sleeve on the armhole, starting on one end.

Pin the gathered section

While pinning, make sure the sleeve section where the fabric is gathered is between those 3-inch marks. Pin the other side and then pull your gathers slightly and pin them in place, too.

Sew the sleeve to the top

Carefully sew the sleeve onto the top. As always, finish the raw edge with a zigzag stitch and finish it off with a straight stitch through the center.

Sew down the top and sleeves

Pin and sew the armpits and sleeve

Finish the top by pinning the armpits together and sewing down, around the body, and down the sleeves. Remember, your top should be right facing. Again, finish the raw edges. First with a zigzag stitch and then a straight stitch down the center.

Make a cute back strip

Make the back strip

For the back strip, hem the two long edges, then fold the back strips and sew.

Pin and sew the back strip

Pin the strip to the top and measure to ensure the strip’s edge is placed an even distance from the shoulder seams on both sides. Trim the excess, fold under the raw edge, pin, and sew in place.

Fold the sleeves

Add elastics to the sleeve

Now it’s time to finish the sleeves. Take elastic and measure it around your wrist; add a bit of seam allowance. Next, hem the edge of the sleeve and fold it again to make a casing for the elastic. Make sure the casing is wide enough so that the elastic sits snug. When making the casing, leave a gap so that you can feed the elastic through.

Insert the elastic

Insert the elastic through the casing, using a safety pin to help guide you. Once this is done, sew the ends of the elastic and stitch the gap closed.

Make a shirred shirt

Make the shirred waistband

We’re almost done! It’s time to make the shirred waistband, and this is the coolest part! Start by drawing lines from top to bottom. The lines should be half an inch apart. Luckily, my print has lines, and so I will just be following those lines. If this isn’t the case for you, simply measure and draw lines with some chalk.

Sew with elastic thread

Next, wind a bobbin with elastic thread and thread it into your sewing machine. Sew along the lines, starting each line with a backstitch.


TIP-

I didn’t sew all the way along the bottom because I wasn’t entirely sure how long I wanted the waistband to be. So, it’s really up to you. In my case, I landed up cutting out some of the bottom parts.

Pin and sew the sides

Next, fold the waistband in half, lengthways, and sew along the side seams. Again, there’s no need to sew all the way until the bottom because I cut the excess fabric.

Attach the waistband to the top

Pin the waistband to the shirt, right sides facing. Match up the center and the sides. Sew together with a zigzag stitch and stretch the shirred fabric to match the length of the top’s fabric.

Cut excess fabric

Try on the shirt and mark where you want to cut off the excess fabric. The length is up to you! Cut the excess and hem the bottom with a double fold.

ZARA wrap top back


Lovely Zara wrap top

Now your ZARA wrap top is complete, and how sleek does it look? Get heads turning and wear it on a fun night out! I hope you enjoyed this tutorial and that you got inspired to make your very own DIY ZARA wrap top.

Suggested materials:

  • Fabric
  • Scissors
  • Elastic
See all materials

The author may collect a small share of sales from the links on this page.

Comments

Join the conversation

Your comment...
Next