Tools and materials:
- Hand tools
Oh, snap! Those dreadful fashion mishaps of losing a jacket or coat snap can be pretty frustrating. Snaps are sometimes tricky to replace as finding the correct replacement parts can be no easy feat. There's no need to panic, though; I'm going to show you how to replace a snap on a jacket in a few simple steps. In no time, you will be able to put functionality back into your favorite jacket or coat.
There are typically 2 kinds of snaps that are found on most garments - spring snaps and heavy duty/camping snaps. Before you start, you need to figure out what kind of snap your jacket has. For the spring snap, it has 2 wire bars that snap onto a nub to hold the pieces together.
There’s also a camping or a heavy-duty snap which has a larger female part. This one also has a circular wire rather than bars that goes around on the inside of the female piece.
This jacket has a spring snap so I'll be using that for this tutorial. If your jacket requires a heavy-duty snap replacement, the process is pretty much the same. Both types of snaps have a male and female part that need to be hammered together. So, where do you get snaps? Online of course! They come in an assorted tray, or you can get a smaller amount of a specific color. I ordered mine from a website called Wawak; they sell a whole variety of snaps in gold, silver, antique brass, black, etc. Amazon also has a lot of parts, but it's a little daunting to sift through the options.
To install the snap, you will need a clamp or a hand tool that you hammer down with. Clamps can be on the expensive side, but it's consistent and pretty easy to use. But for this example, I will show you how to install the snap using the tools, which are cheaper to obtain, but work a little more inconsistently.
In most cases, only one side of the snap breaks off, and the other is still intact. If your new parts work with the old, you can leave other side that's still attached as is. If the new and old don't want to cooperate, you'll need to remove the other side of the old parts and replace both. To do this, you will need a wire cutter or a pliers to pull at the piece. For the female side, grab the snap with your wire cutter and pull on it enough so that you don't rip the fabric. Wiggle the snap as you pull, and it should come loose. If it doesn't, you can gently and carefully cut the metal of the snap, being careful not to cut the fabric.
The male part is a little easier; clamp into the nub of the snap and it should pop off. Then you can remove the back of the piece and the jacket is ready to get new hardware.
For the female side, which is the part that's visible on the outside, take the button piece and insert the post in the existing hole in the fabric on the outside of the garment.
On the inside of the garment, place the other female piece. You should be able to read whatever text or design is stamped on the edge. If you don’t see anything stamped along the edge, you’ve got the piece upside down.
Take your hand tool for the female part and insert the pointed part into the tube of the button piece.
Take your hammer and bang on the top of the hand tool. You want to use moderate force - enough to join the parts, but not so much you damage the hardware.
Feel the snap- if it spins real loose, then that means it needs more securing. So, go ahead and hammer it down a couple more times.
The same goes for the male side, although the parts are a little bit different. Place the bottom, flat part with the post under the fabric and make sure it's centered.
Next, place the top male part over the nub and hammer it down using the male hand tool. Remember to check to see if it's loose. If it is, give it a few more slams to secure it in place.
Test your pieces to make sure they work. And if they do, hooray! You have successfully installed a snap! How easy was that? Next time your jacket or coat's snap goes missing, there's no need to discard it. Just a few, quick steps and your favorite items are as good as new!
Make yourself this summer’s must-have hair accessory – a DIY scarf and bow scrunchie for a fraction...
Change it Up. Revamp. Restyle. Recycle. Renew.These Velvet Drapes are Tired.They are So Ready to...
Belts are a great accessory to quickly elevate your look, and allow you to feel more put together....
Today is all about how to embroider a t-shirt. This is one of those projects you can do whenever you...
You can’t go wrong with a classic white tee and jeans! If you have these 2 basic clothing items,...
Baggy clothes have been on the rise lately, and an oversize button-down shirt is one of the popular...
Styling joggers seems like the activity of the year since the world has gotten more casual. This...
Western wear for women has been very trendy recently. Everybody wants to slap on a cowboy hat or...