How to Make a Chic Velvet Infinity Scarf

Table of Contents

Supplies for your velvet infinity scarf

• 1/2 yard stretch velvet
• ruler
• rotary cutter + mat
• matching thread + hand needle
• beading needle (optional)
• contrast thread (silk thread preferred)
• ballpoint needle for sewing machine

Fabric choices for your velvet infinity scarf

Even though I throw out “stretch velvet” as an option, there’s actually several different fabric types that fall under that category that will work really well for a velvet infinity scarf. We’re working with knits here, but some of these subtypes also show up in woven form as well like crushed velvet.

At the end of the day, there’s a lot of crossover with the terms, so you might see things labeled with multiples of these words. I myself am using a panne velour LOL!

1. Stretch velvet: the classic here. It has a high pile and is luxurious, and has a bit of lycra which adds to the drape and gives it some springy recovery.
2. Panne velvet: this stuff is making a serious comeback! On this type, the pile is flattened in one direction. Because of the crushed appearance, it’s a little bit easier to work with. It’s a polyester, so it’s not as luxurious as a true velvet, but I won’t say no to it! Bonus: panne velvet comes in lots of prints!
3. Velour: Velour is any knit velvet, so there’s a little confusion in terms. I’ve certainly seen my share of fabrics labeled only “stretch velvet”. Fabrics labeled “velour” seem to have a lower pile and may not be as stretchy as another stretch velvet. The classic track suit is all about the velour.
4. Crushed velvet: unlike panne velvet, the pile on crushed velvet can be smooshed in multiple directions. The cool thing about that is that light will bounce off it giving it a two-tone look. It’s kind of like having a print without having a print.

Once you choose your stretch velvet, you’re ready to cut.

Cutting your velvet scarf

This is one time that I did not prewash my fabric. Because I’m using a polyester knit, it’s not going to stretch. If you have any cotton in your velvet’s mix, do prewash.

From there, lay out your fabric on a grid mat wrong side facing up.

Straighten up the edges so that you have an 18″x60″ rectangle. If your fabric is narrower than 60″, that’s okay.

Use a rotary cutter to trim off the selvages.

After you’re done, wipe off your scissors or rotary blade. There’s definitely going to be some gross lint happening that’ll end up on your next project if you don’t clean it!

Basting the scarf

We’re not using pins here. Velvet is highly shifty as you’re working with it and pins will not get the job done. The best way to control the seams is to hand baste them.

Use silk thread if you have it. It will slide in and out of the velvet easily and be easier to pull out later.

I also use a beading needle because it’s extra flexible and the thin shaft won’t damage the velvet.

Fold the scarf’s short sides right sides together onto themselves so that the long edges match.

Thread up your needle with your contrast thread and baste with long stitches down the entire long side.

Sew the long side of the scarf

Next, sew down the long side on your sewing machine with a narrow zigzag (0.5 width, 2.5 length) with a 3/8″ seam allowance. Steam along the seam, hovering over the stitches with your iron, not actually pressing the fabric.

You can remove the basting stitches now.

How to make the twist for your velvet infinity scarf

Now to make the twist that will make your scarf an infinity scarf.

Turn the tube right side out. Put in one pin directly across from the seam on one short side. Repeat for the second short side.

Next twist the short sides to match one pin to one seam right sides together. Pin the second pin to the second seam.

Sewing the infinity twist

After that sew the short sides together with the same narrow zigzag and a 3/8″ seam allowance.

Start sewing a couple inches before your first pin. Stop sewing a few inches after the second pin.

There will be a point where you can’t sew any further because the tube is sewing itself to itself. Stop sewing when you feel that resistance.

Closing up the hole

To finish the scarf, pull the short sides through the hole.

Use your matching thread and needle to make tiny hand stitches to close up the hole.

And that’s all there is to making your own velvet infinity scarf. Wear it long or doubled up for a chic winter accessory that feels good next to your skin!

More DIY scarves to make yourself this scarf season:

• Make a DIY snugly neck warmer scarf
• How to make a fringe scarf

Elizabeth Farr is the writer behind the Elizabeth Made This blog where she shares helpful sewing tips, step by step sewing tutorials and videos to help you explore your creativity through sewing. She has written sewing Eguides and patterns, been a featured teacher at Rebecca Page’s Sewing Summit and Jennifer Maker’s Holiday Maker Fest and her work has appeared in Seamwork and Altered Couture magazines. She also created a line of refashioned garments for SEWN Denver. When her sewing machine isn’t humming, she’s playing and teaching violin, and hanging around a good strategic board game with her husband and 4 kids.

elizabethmadethis.com