How to Repair Holes in Jeans
In this tutorial, I’m going to show you how to repair holes in jeans and other fabrics. This technique can be applied to any garment, fabric, or hole size. It’s no magic bullet, the stitching will be visible, but if you do a good job of matching your thread and your fabric, you can camouflage the damaged area.
Tools and materials:
- Scrap fabric
- Matching thread
- Lightweight fusible tape
- Scissors or pinking shears
- Seam ripper
- Iron with steam
- Sewing machine
Gather your materials
See 1:12-2:02 for advice on materials and where to acquire them.
Prepare
Prepare the damaged area by snipping out the fraying threads, leaving a clean hole in the fabric.
Cut a piece of scrap fabric large enough to cover the hole and a few inches of the fabric around it, which will need reinforcement to prevent new holes.
If the repair you need to do is close to the top, bottom, or crotch of the jeans, this step is not necessary. But if you’re fixing a hole on the knee, you may want to open the side seam with a seam ripper to make it easier to access the damaged area with the sewing machine.
Apply fusible tape
Turn the jeans inside out, and apply fusible tape all around the hole in the fabric.
Iron
Place the scrap fabric on the damaged area, with the side of the fabric you want visible facing down. Turn your iron to a high setting with steam, and iron over the scrap, allowing the heat and the weight to activate the fusible tape. Then wait for it to cool completely.
Prepare for sewing
See 7:40-8:36 for instructions and advice on the sewing portion of the repair.
Sew
Starting from about a ½ inch from the damaged area, begin sewing back and forth around the hole in a zigzag motion, pulling the fabric with your left hand as you sew to help the needle move across the fabric.
Reinforce
To reinforce the repair, sew a straight stitch around the hole. Then, use the same zigzag technique (not a zigzag stitch!) to sew all across the area containing the patch.
Prepare for finishing touches
See 12:38-13:30 for advice on how to set your machine to close up the ripped side seam.
Sew
Sew up the ripped side seam with a zigzag stitch.
Trim
Trim off any edges of the patch that are still loose to prevent them from rolling up.
Iron
Iron the jeans to get out any bumps or wiggles in the fabric, which can occur especially if the jeans are stretch fabric.
And that’s it. You’ve put new life into your favorite old pair of jeans. I hope this tutorial was helpful. Let us know if you have any questions or comments about using this technique to repair your garments.
The author may collect a small share of sales from the links on this page.
Comments
Join the conversation
Hi there. I'm a new fan of yours and glad for your simple and concise style of delivering your instructions. Exactly the way I like to receive instruction. Lucky me, because your projects are the ones I'm most interested in. Teaching is definitely your forte! Thanks for being here and congratulations on following your dream. 😀