Foldable Market Tote

2 Materials
$15
1 Hour
Easy

There are lots of ways to go green, but perhaps one of the easiest ways to love the planet is to simply use a reusable grocery bag. And this foldable market tote is both easy to make and easy to carry. I spotted this concept on one of my favorite online shops, Purl Soho. They also sell linen in a whole spectrum of wonderful colors that are perfect for this project. However, I varied from their instructions and came up with – in my opinion – a simplified and easier version.

step 1 - cut fabric


From the fabric, cut two rectangles that each measure 20″ x 30″. Next, fold one rectangle in half lengthwise; place a pin at the top of the fabric six inches from the long folded side; next place another pin on the raw edged side 17 inches down from the top of the fabric. See photo below.

Fold the fabric from the top pin to the bottom pin and press to create a crease. Using this crease as a guide, cut a diagonal line from pin to pin, cutting off the top right corner. Repeat this process for the second rectangular piece of fabric.

step 2 - hem edges


Along the two angled sides, fold the edge in then fold in again, creating a narrow hem. Stitch down; press. Repeat for the second piece of fabric.

step 3 - stitch center seams


Place the two pieces on top of each other with right sides together. Stitch the center seam, as shown below, beneath the hemmed angled sides. Stitch the other center seam in the same fashion. Then press the seams open.

step 4 - sew the bottom


With right sides together and the center seams aligned neatly in the middle, stitch a seam across the bottom of the bag. Reinforce by stitching over it a second time.

step 5 - sew the handle


To sew a French seam at the top of the handle, first turn the bag right sides out. Stitch a 1/2″ seam allowance across the top of the handle.

Now turn the bag inside out and press the top. Then, with wrong sides together, stitch a 1″ seam allowance across the top. (This hides the raw edges from the first seam as well as creates a casing.)

Next press this seam to one side, as shown below. Then stitch the very edges of the seam (where it is pinned in photo below.)

If you’ve never sewn a French seam before, you’ll find they are not difficult at all and create a polished look.

step 6 - add the tie


A 30″ piece of ribbon, twill tape, or bias tape works well for a tie. For a bohemian touch, I used a strip of fabric scrap twine that I made recently. Use a large safety pin to help guide it through the casing. I love how the tie creates a loosely gathered handle. The ties also keep the bag rolled up when not in use.

Suggested materials:
  • 1 yard cotton fabric, pre-washed (I used a soft chambray)
  • 30″ strip of ribbon, bias tape, or fabric scrap twine

The author may collect a small share of sales from the links on this page.

Wendy at myfrenchtwist.com
Want more details about this and other fashion and style ideas? Check out more here!
Go
Comments
Join the conversation
Next