Make a Skort From Scratch

Its.rikke
by Its.rikke
8 Materials
$15
5 Hours
Medium

I was scrolling online when I came across a skort that I just loved! I felt inspired to recreate the look for myself and I am so happy with how it turned out! Check out how I made this skort from scratch!

Tools and materials:

  • Pattern paper
  • Pencil
  • Pins
  • Scissors
  • Fabric
  • Sewing machine
  • Measuring tape
  • Buckle
How to make a skort

Cut the fabric 

To get started, grab your pattern pieces and start cutting out the fabric. If you want to know how I made the pattern pieces, I’ll add an explanation at the end of the tutorial.

Cut out all the pieces


 I ended up cutting out four pieces for the shorts and three for the skirt. 

Attach at the crotch line

Assemble the shorts 

To create the shorts, I started by attaching the two front pieces at the crotch line, leaving about 2 inches unsewn. 

Sew on one back piece


Next, I sewed the side of one of the back pieces to one of the front pieces. 

Sew the inseams


I then sewed the inseam of the back pieces to their respective front pieces. 

DIY skort


I sewed the crotch seams together. My shorts were pretty much assembled except for the one side seam. 

Fold inward by an inch

Assemble the skirt

I put my shorts to the side and moved on to work on the skirt. I took the smaller front piece of the skirt and folded the straight side over by 1 inch. I then topstitched the fold down. I did the same for the other skirt piece but this time I folded it in by the seam allowance. 

Overlap the front pieces


I then overlapped the front pieces by an inch and stitched where the overlap is to make them into one piece. 

Sew on the back piece of the skirt


I then sewed one side of the back piece onto the front piece. The side that I left unsewn would be where I would attach the zipper. I made sure to choose the same side that I had left open on the shorts. 

Attach the shorts and skirt

Assemble the skort 

Next, I went ahead and pinned the waistline of the shorts to the waistline of the skirt so that the wrong side of the skirt is on the right side of the shorts. I stitched the waistline so that the two pieces would become one. 

Cut a waistband

Attach a waistband 

I measured the waistline and cut out a waistband that matched the length. I made my waistband 1.5 inches wide plus seam allowance. 

Cut the edges


I folded the waistband in half and cut the edges to represent the edges of a ribbon. This would give the waistband a better fit. I then placed the waistband on the skort, right sides together, and sewed it on. 

Sew on the zipper

Attach the zipper 

Next, it was time for the invisible zipper. The zipper was attached from the middle of the waistband. Once the zipper had been sewed in, I closed the rest of the side seam by sewing from the stitch I had used for the zipper all the way down. 

Hem the piece

Hem the skort 

I then went ahead and hemmed the bottom of the skort. I also sewed closed the waistband on the inside of the skirt making sure no stitches were visible on the outside. 

Add a buckle

Add finishing details 

I decided to add a buckle to the waistband just to add a little extra detail to the look. 

How to make a skort pattern

Take measurements 

If you want to learn how to draft the pattern for this gorgeous skort, the above measurements are what you will need. 

Draw a box

Draft a shorts pattern 

Start by drawing a square, half of your hip measurement and the height of your desired short length. The top of the square is your waistline. 

Draw a line down the middle

From the waistline, mark your hip depth and crotch depth and divide the box in half. 

Mark an inch down


On the left side, mark an inch down from the waistline and then an inch inward. Connect that marking to the waistline. That line should be a quarter of your waist measurement. 

Sew a skort



Next, extend the crotch line by a line 15% of a quarter of your hip measurement. 

Connect the lines


At a 45 degree angle, draw a line with a length of ⅗ of an inch. Then go ahead and connect the lines. 

Mark on the right


Next, move over to the right side and mark inward by an inch and then upward by an inch. From this marking, draw a line that touches the waistline when it has a length of a quarter of your waist measurement. 

Extend the crotch


Extend your crotch line by 45% of a quarter of your hip measurement.  

Draw a small line


At a 45 degree angle, draw a line ¾ of an inch. Then go ahead and connect the lines. 

Color code

It always helps to mark the front and back pieces in different colors so that you will know how to cut them out. 

Make a skirt pattern

Draft a skirt pattern 

To create the skirt pattern, start by drawing a box, the width of half your hip measurement, and your desired height. 

Mark the hip depth


Mark the hip depth and then divide the box in half. 

Mark from the middle


From the middle, mark out a quarter of your waist measurement on each side. Then connect the lines. 

Color the back piece


Color the back piece. For the first front piece, mark a ¼ of your waist measurement and draw a line down. Color and label this as front 1. 

Draw another line


From the last line, you drew, draw another line, 2 inches inwards. The two inches account for the 1-inch overlap of the two front pieces and the 1-inch hem. Mark the second front piece in a different color. Remember that if you want to add a waistband, you will need to cut off from your pattern pieces. These pattern pieces don’t include a seam allowance so make sure when cutting the fabric, to add one. 

How to make a simple skort


I am totally obsessed with my new skort! I love that I was able to recreate a piece that I saw online. Would you add any other details to this skort? Let me know in the comments! 

Suggested materials:
  • Pattern paper
  • Pencil
  • Pins
See all materials

The author may collect a small share of sales from the links on this page.

Comments
Join the conversation
Next