Two Fantastic Shirt Refashion Ideas

Jessica Shaw
by Jessica Shaw
8 Materials
$5
90 Minutes
Easy


In this tutorial, I will take you step-by-step through two different upcycle projects that can be done with a men’s button-down shirt. The first is an adorable wide-strapped crop top that can be worn either buttoned up the front or the back, along with a matching mini skirt. The second project is a short-sleeved button-up crop top with a coordinated asymmetrical wrap skirt. I hope you enjoy this upcycle as much as I did!

Tools and materials:

  • Button-up shirts
  • Scissors
  • Ruler
  • Fabric chalk
  • Pins
  • Seam ripper
  • Hook and eye clasp
  • Sewing machine
Button-up shirt refashion


First project

Use a skirt for the pattern

Mark the length of the skirt

Use a skirt you already own as a guide. Lay the skirt on top of the button-up shirt, and mark the shirt at the top corners and center of the waistband with fabric chalk. Mark the shirt at the center of the bottom hem, as well. 

Cut the fabric for both co-ord pieces

Cut the fabric

Cut straight down from the seam where the sleeves meet the shoulders of the shirt until you reach the marks you made at the top edges of the skirt. Then cut directly across the shirt, right below the collar. Cut across the bottom half of the shirt, using the marks you made as a guide. This will create two rectangles, one small and one large.

Decide where the slits will be

Place pins where the slits will be

Hold the larger rectangle up against your body, and figure out where and how long you want the slits to be. There will be a slit on either side of the front panel of the skirt, so make sure to mark both sides. 

Mark the slits with pins


Mark those areas with pins.

Mark where to cut

Draw lines to mark the front panel

From the pins, draw a straight line up to the opposite edge of the fabric.

Upcycle button-down shirt


Do this on both sides. Use a ruler to ensure your lines are straight.

Cut out the front panel

Cut out the fabric for the front panel

Cut along the lines you marked to create the piece for the front panel of the skirt. You now have the front panel as well as two long rectangles that include the side seams of the original shirt and the plackets for the buttons and buttonholes.

Pin the seams

Pin the front panel to the other skirt pieces

Lay the front panel on top of one of the long rectangles, right sides facing, and pin them together along the side.

Don’t pin the slits


Then, lay the front panel on top of the second long rectangle, and pin those together as well. On both sides of the front panel, make sure to leave some fabric unpinned at the bottom for the slits.

Sew the seams

Sew the seams

Sew down the pinned seams, stopping at the point where the tops of the slits have been marked. Sew a few securing stitches across the top of each slit, to prevent the seam from ripping open.

Iron the seams

Iron the seams

Press the seams flat.

Fold down the edges of the slits

Hem the edges of the slit

Fold the raw edges of the slits over about a quarter of an inch and pin them in place.

Sew the edges of the slits


Then, sew down the edges of the slits with a straight stitch.

 

One completed slit


Pin the top

Pin the pieces of the top together

There should be three pieces of fabric for the top--one rectangle, and two small square pieces that contain the plackets for the buttons and buttonholes. Lay the square pieces on top of the rectangle, right sides facing, and pin them down along both short sides of the rectangle.

Sew the seams of the top

Sew the seams

Sew down the side seams.

Fold the darts


Create darts

Create darts along the top edge of the skirt. To do this, lay the fabric of the skirt with the wrong side facing up. Measure two inches from the short side of the fabric, and then make two small vertical folds that reach from the top edge of the skirt down about three or four inches. Pin the folds so the right sides of the fabric are facing each other. Measure two inches from the second short edge of the fabric, and repeat the process. Sew the folds down.

Create darts on the shirt


To create darts on the shirt, fold the short end of the fabric over about six inches, right sides facing. Place a pin on the bottom edge of the fabric, about two inches away from the fold. Place another pin along the fold, about four inches up from the bottom edge. Place a third pin at the halfway point between these two pins. Fold the second short end of the fabric over, and repeat the process. Then sew the folds down, using the pins as a guide to create an angled seam.

Iron the edges

Fold and iron the raw edges

Fold the raw edges of both the shirt and skirt down about a quarter of an inch, and iron them down.

Sew the top and bottom hems

Sew the hems

Sew the hems down along the top and bottom edges of both the shirt and skirt.

Cut strips for the straps

Cut out straps

From the offcuts of the original shirt, cut out two long rectangles approximately fifteen inches long, and six inches wide.

 

Fold in half lengthwise

Fold, iron, and sew the straps

Fold each rectangle in half lengthwise.

Iron the fold


Then, iron them so the fold will hold, and sew the long edges together.

 

Turn the straps right side out

Turn the straps right side out

Fold one open end of the fabric up, and keep pushing the fabric of the strap through until the entire seam is hidden inside.

Attach the straps

Attach the straps to the top edge of the shirt

Hold the fabric of the shirt up to your body to get an idea of where the straps should be attached, and then pin the straps along the top edge in the preferred place.

One completed strap


Then sew the straps in place, and you’re done!

DIY button-up shirt refashion


The front of the skirt


The back of the skirt


The top buttoned in the front

Men’s button-down shirt refashion


Second project

Use a crop top for the pattern

Trace around a shirt

To create the top for this outfit, turn the button-up shirt inside out, and lay a cropped shirt on top, aligning the top edges of the sleeves on both shirts. Trace around the cropped shirt with fabric chalk.

Cut the fabric

Cut the fabric for the top

Use the chalk outline as a guide to cut out the fabric for the top.

 

Cut the fabric for the skirt

Cut out the skirt

Cut a straight line down one side of the remaining fabric to create a long rectangle for the skirt. One side seam of the original shirt should remain intact.

Add fabric if necessary

Add fabric if necessary

Wrap the fabric for the skirt around your waist to make sure it fits. If you’re short on fabric, you can cut more from the offcuts and attach it to make the rectangle longer. Make sure that the plackets with the buttons and buttonholes remain along the short edges of the rectangle.

Sew the raw edges

Sew down the side seams and underarm seams of the shirt

Keep the shirt inside out, and sew down the seams along the sides of the shirt, and along the bottoms of the sleeves.

Create darts

Create darts in the skirt

Fold and pin four evenly spaced darts on the back panel of the skirt, and sew them down.

Hem the raw edges of the sleeves

Hem the openings of the sleeves and the bottom edge of the shirt

Fold the raw edges of the sleeves and the bottom edge of the shirt up a quarter-inch, and sew them down. 

Hem the top of the skirt

Hem the top edge of the skirt

Fold the raw edge at the top of the skirt over half an inch, and sew it down.

Sew the hem down


Remove the buttons

Remove the buttons

Use a seam ripper to remove the buttons on the front of the skirt.

Refashion button-down shirt

Sew the buttons back on

Place the buttons in a diagonal line across the front of the skirt. Use the buttonholes to ensure they are spaced properly. Mark the points where the buttons should be, and then sew them into place by hand.

Hook and eye closure

Sew a hook and eye closure onto the top edge of the skirt

Sew the eye of the closure onto the wrong side of the fabric in the top corner of the placket where the buttons used to be. Wrap the skirt around your waist to determine where the hook should be, and mark that spot. Then sew the hook onto the skirt, on the wrong side of the fabric. The closure will be hidden behind the front panel of the skirt.

Hook and eye closure sewn on


DIY button-down shirt refashion


The project is complete! 


I love both of these projects so much! The tops of both outfits are super cute, and I’m really happy with them. The skirts are also adorable, but they are a tad too short for my taste. But that’s what I get for making them out of shirts. Let me know what you think of these upcycles!

Suggested materials:
  • Button-down shirts
  • Scissors
  • Ruler
See all materials

The author may collect a small share of sales from the links on this page.

Comments
Join the conversation
 1 comment
Next