Tutorial--- Fabric Covered Bead Bracelet---
I found this wooden bead necklace at the dollar store. At first, I thought this was very cute, but when I went home and tried it on, some of the beads were too big and didn't look good on me. Also, when I looked closely at it, each bead had a dark wood pattern. It was rather ugly...
I am not the type of girl to mope and get upset about stuff like this. I have decided to make a bracelet that I've always wanted to make. I found one tutorial here. I made mine a little different than her's. Here is my version of the fabric-covered bead bracelet.
1. Cut the necklace and pick out the beads you want to use. Pick out the fabric you want to use, I used fabric from my scraps. You can find wooden beads at most craft stores. For the fabric, I think it will work better if the fabric had small patterns, that way you can show off the design on the fabric. Figure out how long it needs to be (length of your wrist + several extra inches) and for the width, cover the largest bead that you are going to use + 3/4" for the seam allowance and room to slide the beads in.
2. Fold the right sides together, sew the fabric end to end using 1/4" seam allowance. Turn the tube inside out. Press the seam with an iron.
3. Slide a bead into the tube, then stick a needle through the tube above the bead and wrap it around the tube several times then tie it off. Remember to hide the knot. Repeat until all the beads are in the tube. I used DMC floss and picked the color that I wanted to bring out of the fabric. I could have chosen red or light brown too. It is always a personal choice.
4. When you are finished putting the beads in, close both ends. Make sure you have enough length to put one more bead in and for seam allowance before you cut off any extra fabric. Fold 1/4" inside.
5. Cut two ribbons 10" long and seal the ends with flay check (or melt). Sew the ribbon in both ends with one more bead. Close.
6. Enjoy your new bracelet.
This is so fun and easy to do, Perhaps, it would make a perfect gift too. You can't have too many good gift ideas for birthdays and Christmas, right?
Enjoyed the project?
The author may collect a small share of sales from the links on this page.
Just darling! Thanks for sharing. Going to pass on to my friends!
wooden beads can often be dyed, if not varnished- and fingernail polish or acrylic paints can also be used to make them more colorful