Make a Smocked Tiered Maxi Dress From a Duvet Cover
![Regine Morales](https://cdn-fastly.hometalk.com/media/profile/2020/12/17/50332760_1.jpg?size=91x91)
This is the perfect example of what it means to repurpose. Whether it’s an old duvet cover you found in your closet or just some super cool pattern that you had to wear, this tutorial will teach you how to sew a smocked maxi dress that I know you’ll love.
Tools and materials:
- Blanket/duvet cover
- Scissors
- Chalk
- Tape measure
- Sewing machine
- Elastic thread
Take your measurements
Before attempting to cut your fabric you must know how much fabric you need. Remember to take your measurements so that you can apply them!
Measure your fabric
Fold the fabric in half and mark off your measurements. The width should be half of your chest measurement plus five inches and the length should be the length from your upper chest to waist. Mark and cut.
Sew the upper edge
Unfold your fabric and double-fold the upper edge. Pin to secure and sew with a straight stitch.
Create a smocked effect
Using some elastic thread, sew the fabric right side up with the first stitch about half an inch from the upper edge. Continue with this pattern by placing the second stitch half an inch from the first and so on until reaching the bottom.
Make the first tier
Using your body measurements, make the width of the tier half of your hip measurements times one and a half. So, if your hip measurement is ten centimeters, the width of your fabric should be 5 x 1.5. Next, measure out your desired length. This is up to you and how long you want the dress to be.
After cutting out your fabric, zig-zag stitch the upper edge to keep it from fraying. Then, add a straight loose stitch - do not backstitch. Next, grab a thread from the loose stitch and begin gathering the fabric. The goal is to have the width of the fabric eventually match the width of the smock top. Once the two match, pin them together and sew using a straight stitch.
Add a zig-zag stitch
Add a zig-zag stitch to the bottom edge to keep the fabric from fraying.
Make the second tier
For the second tier, the width is half the length of the first tier times one point five. So, if your first tier was 20 centimeters long, your second tier needs to be 10 x 1.5. You can, however, add a few centimeters to get more gather on the bottom. (The length is still up to you).
Zig-zag stitch the upper raw edge to keep the fabric from fraying. Then, add a straight stitch (make sure not to backstitch!). Next, take a thread from the straight stitch and pull to gather the fabric until the width of the second-tier matches the width of the first. Once the widths match, sew the tiers together.
Connect the sides
Take your dress and fold it over to connect the sides. Pin down the dress to secure and sew using a straight stitch followed by a zigzag stitch.
Make the straps
For the straps, cut out four pieces of fabric that are 23 inches long and three inches wide. Fold the pieces of fabric right sides together and pin to secure. Then, sew together using a straight stitch.
Use a safety pin to turn the strap right side out. Next, pin the fabric to the body of the dress - about 7 centimeters (about 3 inches) from the side. Make sure to have two straps in the front and two in the back. Sew the straps in place.
Hem to finish
To finish the dress, double fold the bottom edge and sew with a straight stitch.
I know it isn’t summer anymore, but I’m still going to be wearing this dress. It’s summer somewhere, right? This easy smocked maxi dress is the perfect outfit to imagine yourself on the beach in.
Enjoyed the project?
Suggested materials:
- Duvet cover
- Scissors
- Chalk
- Tape measure
- Sewing machine
- Elastic thread
The author may collect a small share of sales from the links on this page.
Comments
Join the conversation
So lovely!
Very nice work!