Learn How to Make Easy Fall Earrings With This Quick Tutorial

Kellie Sutton
by Kellie Sutton
10 Materials
10 Minutes

Who doesn’t love the fall? It’s such a wonderful season. It’s common to dress for fall, but what about accessorizing for it? In this tutorial, I’ll walk you through the steps of making gorgeous earrings that are perfect for autumn. These earrings are super quick and easy to make, and you can find all the materials you’ll need in my complete kit. So go ahead and grab your own kit from the link in the video’s description, and get ready to make a truly special pair of earrings.

Fall earrings materials

Tools and materials:

  • Cutters
  • Chain nose pliers
  • Bent chain nose pliers
  • Round nose pliers
  • Craft wire
  • Earwires
  • Czech glass beads
  • Bead caps
  • Crystal spacers
  • Charms
Fall earrings
Cut your wire

To start, you’ll need to cut your wire. So grab your cutters and cut off 6” of wire. Then take the wire and place your chain nose pliers on the end. Use your fingers to straighten out the wire, then run the pliers down to the 2” mark, and use your thumb to bend the wire, giving you a sharp angle. 

Easy fall earrings
Make a loop

You’re now going to take your pliers and place them, so that they’re horizontal to your body, right on top of that little bend. Then push the wire up and over and down. Rotate your pliers so that they’re parallel to the table and pull your wire straight back. Then remove your pliers and you should have ended up with a loop.

DIY fall earrings
Wrap the loop

Take your chain nose pliers and place them right over the loop that you just created. Then take your bent chain nose pliers and wrap the smaller part of the wire under the loop twice. Then wrap twice in the opposite direction. Now take the flush side of your cutters and trim off the excess wire then use the pliers to tuck in the bur. 

Wire wrapped loop earrings
Load the beads

Now it’s time to load the beads onto the wire. So grab the starburst bead and slide that on. Then put on the rose gold crystal spacer, the bead cap, the fire polish, and another bead cap.

DIY wire wrapped loop earrings
Wrap the top loop

Grab hold of your beads and push your wire down against them. Then take your pliers and put them in that bend and create another loop, just like before. You’re now going to take your disc bead and pop it into the loop. Then take your chain nose pliers and wrap the wire under the loop. 

How to make fall earrings
Add the ear wires

Take your cutters and trim off the excess wire, just like before, then tuck in the remaining bur. Now straighten out the wire wherever necessary. Lastly, pop on your ear wire and close it up. Once you’ve done that, go ahead and repeat the same process for the second earring, and you’re done! 

Easy earrings for fall

I love these earrings; they are so perfect for fall! I love the way the copper looks, it just makes it look so fun and fresh. These earrings took literal minutes to make and I think they just look so cute. I definitely think you’ll enjoy wearing them! Of course, they’d also make a great gift. If you decide to make these earrings, I’d absolutely love to see how they turn out, so be sure to leave me a picture in the comments! Happy fall, everyone! 

Suggested materials:
  • Cutters
  • Chain nose pliers
  • Bent chain nose pliers
See all materials

The author may collect a small share of sales from the links on this page.

Join the conversation