Upcycle Style: Spotty Gold Leather Tote Bag

Make a leather tote bag by upcycling an unwanted thrift store find. Leather bags are expensive, but I’ll show you how to make your own for just a few dollars and a little bit of crafty know-how!

This post contains affiliate links

The weather is warming up here in Melbourne, so it was time to update my every day handbag to something a little lighter and brighter.

Problem is leather bags cost a pretty penny and I was having a hard time finding something to suit my needs, style and budget.

Of course I saw that as a challenge and was inspired to flex my creative muscles to make a bag of my own.

You will never believe what I made this leather tote bag from. I’ll give you a hint, it was an 80’s fashion disaster!

I thrifted this old leather jacket for an 80’s dress up party a couple of years ago and paid $15.

The colour is fab but the styling is truly awful, I knew it had potential but it took me a while to work out what it was.

I knew I wanted to make a tote bag, and bought leather needles about 6 months ago in preparation.

The gold treatment just came to me out of the blue, luckily I had all the supplies required at hand when my epiphany struck.

This is not really a project I’d recommend for a novice sewer, even I found working with leather a challenge.

Unpicking seams will leave holes so you really need to get it right the first time. If you want a practice run, try making a mock up in thick canvas or heavy denim.

Allow a whole afternoon for this sewing project.

Not confident enough to sew with leather? Try making these fabric tote bags instead:


You will need:


For template drafting:

  • paper
  • ruler
  • pencil
  • scissors

Materials:

  • Soft leather (or faux), this can be from a large leather jacket (like I used) or from your local leather supplier.
  • Dot stickers (the easy peel kind)
  • Gold spray paint (lash out on the good quality stuff for best results)

Tip: Take your bag pattern pieces with you when buying your leather to work out how much you will need.

Cutting:

Sewing:

Miscellaneous:

  • Protected well ventilated area for spray painting
  • Soft cleaning cloth


How to make a leather tote bag:


Strap yourself in, this is a long one.

I based this pattern on my favourite bag that I use every day. It’s the perfect size for my needs and have included the measurements for you to draft. Feel free to adjust the sizing to your needs or draft your own simple tote pattern.



Preparation:

1. Draft the pattern measurements (below) onto paper and cut out pattern pieces. If you are making your own straps (I used the belt jacket for my straps) draft a strap pattern too.

2. If you are upcycling an exsisting garment, remove lining and unpick (or cut) into largest panels possible. Don’t worry if there is a seam in your piece as long as the piece lies flat.

3. Lay pattern on to leather and weigh down (don’t use pins or you’ll make holes in the leather).

4. Cut with rotary cutter and mat.

I cut the front and back panels on the sleeves and the sides from lapels. Belt became bag handles/straps. You’ll notice I included some existing garment seams in the pieces

5. To make the spots, stick on your dot stickers randomly. Have fun with this one, the kids may want to help.

6. In a well ventilated area, spray paint one panel at a time and allow to dry. Spray just enough to cover the base colour, we are aiming for a thin coat. Avoid over-spraying as it can cause drips, or cracking later on.

7. Once dry, remove your gold spots. Emma helped me with this step and stuck all the stickers on me!

Assembly & Sewing:

Sewing tips:

  • Set your machine stitch length to long.
  • Test your stitches out on some scrap pieces first.
  • Sew slowly and steadily, you may need to hand crank fly wheel over any really bulky seams.

This bit is a little tricky, you may want to do a mock up out of paper to understand how the pattern pieces fit together.

8. Working with both side panels and a front panel, lay out as shown making sure top of panels align and the front panel sits over both side panels.

9. Tape to hold in place

10. Stitch front to sides stopping about 1cm (1/2″) from bottom

11. Fold the sides in at right angles to make the base (see picture)

12. Tape in place and sew. Continue the existing side seams down on an angle to base.

This corner seams are really tricky, go slowly and try not to catch any extra leather as you sew.

13. Align remaining back panel with side, and sew all the way down, when you get to the bottom fold flat and keep sewing around corner. Sew across bottom and back up other side.



If the top doesn’t line up perfectly just trim it so it’s straight.



You will need to do some maneuvering, I had a slight boo boo and one of my corners wrinkled a bit (luckily it’s not that noticeable).

By this stage you will have some very gold fingers, go wash your hands.

Adding Binding & Handles:

I used the leather jacket’s belt to make the handles.

14. To make your handles, fold edges of strap into center and sew a seam down the middle as per diagram below.

The following step is optional but I think adding the contrasting trim adds a nice professional finish to the edge of the bag.

15. Cut a long strip of leather (long enough to go all the way around the top of bag) about 2cm wide (just less than 1″). You may need to join two strips. Treat them as you would bias tape and join at right angles to reduce bulk.

16. Starting on a side panel fold over edge and stitch on making sure to catch both front and back. Finish by just overlapping and trimming where you started.

17. Tape straps into position and mark stitching lines with pencil. As a guide divide the bag into thirds to mark where straps go, stitching starts about 1/2″ away from edge in a capital ‘I’ shape, 1.5″ long and top and bottom about 0.5″.

18. Stitch straps into place, go over a couple of times for extra strength.

19. Give the bag a gentle rub all over with a soft cloth to get rid of excess paint residue. This prevents staining of your clothes.



The gold will wear off with use but I don’t really mind too much, it will eventually have a lovely burnished look.

Phew! All done.

That was a big project but certainly worth all the effort!

I’m so happy with it and can’t wait for someone to say “Love your bag”, then I’ll say “I made it!”. Then my day will be made.

Do you prefer the before or after?

I can’t believe what we wore in the 80’s, I had a denim jacket in a similar style, I’m betting you did too!

The author may collect a small share of sales from the links on this page.

My Poppet Makes
Want more details about this and other fashion and style ideas? Check out more here!
Go
Comments
Join the conversation
2 of 16 comments
  • Antje Price Antje Price on Aug 18, 2021

    Love the jacket to bag transformation. To stop the gold from rubbing off you could try to coat the gold paint with “Leather Hero Satin Top Coat Leather Sealant Color “ it’s around $8 on Amazon. I use on my painted leather bags and shoes.


  • Wendy Baldwin Wendy Baldwin on Aug 18, 2021

    What s great idea! Very cute! ❤️

Next