All You Need is Thread to DIY These Earrings
If you have embroidery thread sitting unused in your crafts box, you can DIY a simple pair of earrings in no time!
I’ll show you how you can create tassel earrings in just a few short steps. Let’s get into it!
Tools and materials:
- Embroidery thread
- Scissors
- Fish hook
- Jump ring
- Pliers
1. Put the jump ring in the middle of the thread
Slide a jump ring to the middle of the embroidery thread.
It’s easiest to do this by bringing the paper wrapper to the bottom of the thread and bunching the end so it’s small enough for the ring to fit around it.
Then, you can take the paper off.
2. Fold the thread
Fold the thread in half at the ring.
3. Bind one end of the thread
Tie a small piece of thread about an inch below the folded edge with the jump ring.
4. Cut off the end of the thread
Cut off the loose fold on the other end.
5. Loosen the hook ring
Use pliers to loosen the ring on the end of a fish hook.
6. Attach the hook to the thread
Place the hook underneath the jump ring connected to the thread.
7. Close the hook ring
Close the fish hook’s ring.
All you need is thread to DIY these earrings
Here are the finished earrings! You can use any color thread or even mix and match colors to get a unique pair of earrings every time.
Let me know if you plan to try out this DIY below!
Enjoyed the project?
The author may collect a small share of sales from the links on this page.
Comments
Join the conversation
I like this idea. My daughter has a bunch of that thread in her craft box. I may have to make some with her.