Cute and Easy Floral Resin Earring DIY Tutorial

Tools and materials:

• Goggles
• Gloves
• Apron
• Epoxy resin
• Flowers
• Tweezers
• Round nose pliers
• Long nose pliers 
• Cutter tools 
• Rubbing alcohol 
• Resin mold
• Metal bezel frames
• Epoxy resin 
• Jump rings 
• Fish hook

1. Mix the epoxy

Mix your one-to-one ratio of epoxy. You want to do this before you put the flowers in so that if there are any little bubbles, they can go to the surface.

2. Place flowers in molds

Pick up flowers with your pliers and place them in the molds. You can keep the design simple with just one flower or add multiple flowers.

Be careful that your tweezers don’t break the petals or scratch the mold. 

Be warned that if you use a flower with lots of petals, bubbles can hide amongst them. 

3. Spray flowers

Next, spray the flowers with 91% rubbing alcohol to eliminate the bubbles as much as possible.

Bear in mind that when you spray the flowers, the spray bottle will release some air which can move the flowers around slightly, which is a bit frustrating.

4. Pour over resin

Now pour the resin on top of the flowers and then spray the resin with rubbing alcohol.

If your flowers move out of position, you can use your tweezers or a toothpick to gently get them back in place while also removing any bubbles.

5. Leave to set

Wait 24 hours before you unmold your resin pendants.

6. Place jump rings through pendants

Then take your pliers and open up your jump rings pretty far to make sure you can get it in the pendant.

Place the jump rings through the pendants.

7. Add bezel frame

Then close it up just enough, so there's a gap so you can slip it into the bezel frame that you want to surround your resin with.

Doing this is a lot easier than trying to close that big gap over both the resin and the frame.

8. Add other jump rings and hook

Add on two smaller jump rings, followed by the earring hook.

Resin earrings DIY

And there my fellow jewelers, we have our earrings.

The cool thing about this project is that you can use whatever type of flowers you want in whatever combination.

You can also play around with different molds and different bezel frames, so there is really an unlimited number of designs you can create.

Let me know which design you like the best in the comments below.